Duplex UNS S32205 Pipes & Tubes

Duplex UNS S32205 Pipes & Tubes for process, pressure and heat-transfer lines, available on MetalMitra in seamless, ERW and welded to ASTM A790, with mill-certified traceability on every lot.

Choose seamless, ERW, welded or fabricated construction across a broad spread of diameters, wall thicknesses, schedules and lengths for process, pressure and structural lines.

UNS S32205 is a 2205 duplex grade with tighter nitrogen and molybdenum ranges for improved pitting resistance. Duplex stainless steel has a two-phase austenitic-ferritic structure that delivers higher strength than standard austenitic grades together with good resistance to pitting, crevice corrosion and chloride stress corrosion cracking.

Product range

• Seamless Pipes — The go-to choice for high-pressure and high-temperature lines.
• ERW Pipes — Economical welded pipe for utility and process piping.
• Welded / EFW Pipes — Fusion-welded construction for large-diameter runs.
• Tubes — Round, square and rectangular tubes, plus U-bends for heat exchangers.

Why engineers choose it

• High Strength — Roughly double the yield strength of standard 300-series grades.
• Corrosion Resistance — Strong resistance to pitting, crevice and general corrosion.
• SCC Resistance — Far better resistance to chloride stress corrosion cracking.
• Cost Efficient — Thinner walls and long life trim material and lifecycle costs.

Where it is used

• Oil & Gas
• Chemical Processing
• Petrochemical
• Desalination
• Marine Applications
• Pulp & Paper
• Heat Exchangers
• Pressure Vessels
• Water Treatment
• Offshore Platforms
• Fabrication
• General Engineering

Inspection & paperwork

Suppliers on MetalMitra back Duplex UNS S32205 Pipes & Tubes with the checks and paperwork your QA team expects.

• Dimensional & visual inspection
• Grade verification against the order
• Chemical composition verification
• Mechanical property testing
• Flattening / flaring tests as applicable
• Hydrostatic testing as applicable
• Ultrasonic / eddy current testing as applicable
• EN 10204 3.1 Mill Test Certificate
• Third-party inspection (TPI) on request

The MetalMitra advantage

• Checked sellers only — Every supplier profile is screened by MetalMitra before it goes live.
• Faster sourcing — Post one requirement and receive competitive offers without chasing calls.
• Paperwork sorted — MTC 3.1, test reports and TPI arranged as your project demands.
• Global logistics — Seaworthy packing and dispatch to project sites across the world.

Get a quote

Tell us the specification, quantity and destination you need for Duplex UNS S32205 Pipes & Tubes. MetalMitra connects you with suppliers who can deliver.

Technical note: Figures shown are indicative. Final acceptance should be based on the applicable standard, approved drawings and the MTC supplied with the material.