Carbon Steel Heat Exchanger Tubes: ASTM A179 / A192, Cold drawn seamless. Get quotes from verified suppliers on MetalMitra.
- Carbon Steel Heat Exchanger Tubes
- Heat Exchanger & U-Tubes
- ASTM A179 / A192
- Cold drawn seamless
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Standard | ASTM A179, A192, A214 / ASME SA179, SA192 |
|---|---|
| Grade | Low carbon steel |
| Outside Diameter | 12.7 mm to 76.2 mm |
| Wall Thickness | 1 mm to 6 mm |
| Length | Up to 18 m |
| Condition | Cold drawn, annealed |
| Ends | Plain end, U-bend on request |
Grades & standards
- ASTM A179
- ASTM A192
Source Carbon Steel Heat Exchanger Tubes from verified manufacturers, mills and stockists on MetalMitra. Cold-drawn seamless low-carbon steel tubes for heat exchangers, condensers and boilers in non-corrosive service.
Share your size, grade, quantity and delivery location once, and compare offers from suppliers who stock or manufacture Carbon Steel Heat Exchanger Tubes to ASTM A179.
What you can source
- Straight Tubes — Cut-length heat exchanger and condenser tubes.
- U-Bend Tubes — Tubes bent to radius with stress-relieved bends.
- Finned Tubes — Low-fin and high-fin tubes for improved heat transfer.
- Boiler & Condenser Tubes — Tubes for boilers, condensers and feed-water heaters.
Key properties
- Thermal Efficiency — Thin, uniform walls for efficient heat transfer.
- Tight Tolerances — Close OD and wall tolerances for tube-sheet fit-up.
- Corrosion Resistance — Grade options for cooling water, steam and process fluids.
- Proven Reliability — Hydro and eddy-current tested for leak-free service.
Applications & industries
- Shell & Tube Heat Exchangers
- Condensers
- Feed-Water Heaters
- Boilers
- Refineries
- Power Plants
- Fertiliser Plants
- Sugar Plants
Testing & documentation
Inspection and documentation for Carbon Steel Heat Exchanger Tubes follow ASTM A179, A192 plus any extra requirements in your PO.
- Visual & dimensional inspection
- Hydrostatic test
- Eddy current / NDT test as applicable
- Flattening, flaring and bend tests
- Positive material identification (PMI)
- EN 10204 3.1 Mill Test Certificate
Why source on MetalMitra
- Verified suppliers — Mills, manufacturers and stockists are reviewed by the MetalMitra team before they list.
- One RFQ, several quotes — Share size, grade and quantity once and compare offers side by side.
- Full traceability — Heat numbers, test certificates and third-party inspection on request.
- Delivered worldwide — Export-worthy packing and shipping to India, the Middle East, Africa, Europe and the Americas.
Request pricing
Post an RFQ for Carbon Steel Heat Exchanger Tubes with your drawing or specification and receive quotes from verified suppliers.
Technical note: Values on this page are for reference. Always confirm against the governing standard, your purchase specification and the test certificate.
Applications & industries
- Shell & Tube Heat Exchangers
- Condensers
- Feed-Water Heaters
- Boilers
- Refineries
- Power Plants
- Fertiliser Plants
- Sugar Plants
- Petrochemical & Refining
- Power Generation
- Chemical Processing
- Desalination
- Fertiliser
- Sugar
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
FAQs
OD, wall thickness, grade, leg length, bend radius and quantity per radius.
Bends are usually solution annealed or stress relieved on request, especially for tight radii.
ASTM A213, A249, A688, A179 and A192 are the most common.
Need Carbon Steel Heat Exchanger Tubes?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
