5-Valve Manifolds: SS 316, DP transmitter service. Get quotes from verified suppliers on MetalMitra.
- 5-Valve Manifolds
- Instrumentation Valves
- SS 316
- DP transmitter service
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Material | SS 316, Monel, Hastelloy |
|---|---|
| Pressure | Up to 6,000 psi |
| Type | 5-valve |
| Connections | 1/2" NPT, flanged |
| Mounting | Direct, remote |
Grades & standards
- Stainless Steel 316
- Stainless Steel 316L
Chemical composition & mechanical properties
| C | Mn | P | S | Si | Cr | Ni | Mo | N |
|---|---|---|---|---|---|---|---|---|
| 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | 0.10 |
| Tensile strength, min | 515 MPa |
|---|---|
| Yield strength (0.2%), min | 205 MPa |
| Elongation in 50 mm, min | 40% |
| Hardness, max | 217 HBW |
Single values are maximums unless marked min. Values per ASTM A240 (plate, sheet and strip); always confirm against the purchase specification and the mill test certificate.
| C | Mn | P | S | Si | Cr | Ni | Mo | N |
|---|---|---|---|---|---|---|---|---|
| 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | 0.10 |
| Tensile strength, min | 485 MPa |
|---|---|
| Yield strength (0.2%), min | 170 MPa |
| Elongation in 50 mm, min | 40% |
| Hardness, max | 217 HBW |
Single values are maximums unless marked min. Values per ASTM A240 (plate, sheet and strip); always confirm against the purchase specification and the mill test certificate.
Source 5-Valve Manifolds from verified manufacturers, mills and stockists on MetalMitra. Five-valve manifolds with isolate, equalise, test and vent functions for differential pressure measurement on gas and steam.
Share your size, grade, quantity and delivery location once, and compare offers from suppliers who stock or manufacture 5-Valve Manifolds.
What you can source
- 2-Valve Manifolds — For gauge and static pressure transmitters.
- 3-Valve Manifolds — For differential pressure transmitters.
- 5-Valve Manifolds — For DP transmitters with test and vent ports.
- Double Block & Bleed — DBB valves for isolation and venting.
Key properties
- Compact Integration — Multiple valves in one forged body.
- Leak-Tight Design — Fewer joints mean fewer leak paths.
- High Pressure — Rated up to 6,000 psi and above.
- Easy Calibration — Isolate, equalise and vent from one block.
Applications & industries
- Pressure Transmitters
- Differential Pressure Measurement
- Flow Metering
- Sampling Systems
- Oil & Gas
- Refineries
Testing & documentation
Inspection and documentation for 5-Valve Manifolds follow the applicable standard plus any extra requirements in your PO.
- Hydrostatic shell test
- Seat leak test
- Helium leak test on request
- Dimensional inspection
- Material Test Certificate
Why source on MetalMitra
- Verified suppliers — Mills, manufacturers and stockists are reviewed by the MetalMitra team before they list.
- One RFQ, several quotes — Share size, grade and quantity once and compare offers side by side.
- Full traceability — Heat numbers, test certificates and third-party inspection on request.
- Delivered worldwide — Export-worthy packing and shipping to India, the Middle East, Africa, Europe and the Americas.
Request pricing
Post an RFQ for 5-Valve Manifolds with your drawing or specification and receive quotes from verified suppliers.
Technical note: Values on this page are for reference. Always confirm against the governing standard, your purchase specification and the test certificate.
Applications & industries
- Pressure Transmitters
- Differential Pressure Measurement
- Flow Metering
- Sampling Systems
- Oil & Gas
- Refineries
- Oil & Gas
- Petrochemical & Refining
- Power Generation
- Chemical Processing
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
FAQs
A 3-valve or 5-valve manifold, depending on whether you need separate vent or test ports.
A valve assembly with two isolation valves and a bleed between them for safe isolation.
Yes, flange-to-flange and remote-mount versions are available.
Need 5-Valve Manifolds?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
