Stainless Steel Threaded Rods: DIN 975, A2 (304) / A4 (316). Get quotes from verified suppliers on MetalMitra.
- Stainless Steel Threaded Rods
- Threaded Rods
- DIN 975
- A2 (304) / A4 (316)
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Standard | DIN 975, DIN 976 |
|---|---|
| Grade | A2-70 (304), A4-70 / A4-80 (316) |
| Size | M4 to M48 |
| Length | 1 m, 2 m, 3 m |
| Thread | Metric coarse, UNC |
Grades & standards
- Stainless Steel 304
- Stainless Steel 316
Chemical composition & mechanical properties
| C | Mn | P | S | Si | Cr | Ni | N |
|---|---|---|---|---|---|---|---|
| 0.07 | 2.00 | 0.045 | 0.030 | 0.75 | 17.5–19.5 | 8.0–10.5 | 0.10 |
| Tensile strength, min | 515 MPa |
|---|---|
| Yield strength (0.2%), min | 205 MPa |
| Elongation in 50 mm, min | 40% |
| Hardness, max | 201 HBW |
Single values are maximums unless marked min. Values per ASTM A240 (plate, sheet and strip); always confirm against the purchase specification and the mill test certificate.
| C | Mn | P | S | Si | Cr | Ni | Mo | N |
|---|---|---|---|---|---|---|---|---|
| 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | 0.10 |
| Tensile strength, min | 515 MPa |
|---|---|
| Yield strength (0.2%), min | 205 MPa |
| Elongation in 50 mm, min | 40% |
| Hardness, max | 217 HBW |
Single values are maximums unless marked min. Values per ASTM A240 (plate, sheet and strip); always confirm against the purchase specification and the mill test certificate.
Source Stainless Steel Threaded Rods from verified manufacturers, mills and stockists on MetalMitra. Fully threaded stainless steel rods for hangers, supports and fixings in corrosive or outdoor environments.
Share your size, grade, quantity and delivery location once, and compare offers from suppliers who stock or manufacture Stainless Steel Threaded Rods to DIN 975.
What you can source
- 1 m & 3 m Rods — Standard lengths to DIN 975.
- High Tensile Rods — ASTM A193 B7 and Class 8.8 / 10.9.
- Stainless Rods — A2 (304) and A4 (316) rods.
- Cut Studs — Rods cut to stud length with nuts.
Key properties
- Fully Threaded — Thread along the full length for flexible use.
- Cut to Length — Easily cut on site to the required length.
- Grade Options — From Class 4.6 to B7 high tensile and stainless.
- Coating Options — Plain, zinc, HDG and PTFE coated.
Applications & industries
- Pipe Supports
- Hangers & Ceiling Fixings
- Flange Bolting
- Anchoring
- Construction
- HVAC & MEP Services
Testing & documentation
Inspection and documentation for Stainless Steel Threaded Rods follow DIN 975, DIN 976 plus any extra requirements in your PO.
- Thread gauge check
- Hardness & proof load test
- Dimensional inspection
- Coating thickness check as applicable
- Mill Test Certificate
Why source on MetalMitra
- Verified suppliers — Mills, manufacturers and stockists are reviewed by the MetalMitra team before they list.
- One RFQ, several quotes — Share size, grade and quantity once and compare offers side by side.
- Full traceability — Heat numbers, test certificates and third-party inspection on request.
- Delivered worldwide — Export-worthy packing and shipping to India, the Middle East, Africa, Europe and the Americas.
Request pricing
Post an RFQ for Stainless Steel Threaded Rods with your drawing or specification and receive quotes from verified suppliers.
Technical note: Values on this page are for reference. Always confirm against the governing standard, your purchase specification and the test certificate.
Applications & industries
- Pipe Supports
- Hangers & Ceiling Fixings
- Flange Bolting
- Anchoring
- Construction
- HVAC & MEP Services
- Oil & Gas
- Petrochemical & Refining
- Power Generation
- Construction & Infrastructure
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
FAQs
The standard for fully threaded rods with metric coarse threads, usually in 1 m and 3 m lengths.
ASTM A193 B7 rods with A194 2H nuts are the usual choice.
Yes, UNC and UNF threads are available.
Need Stainless Steel Threaded Rods?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
