Titanium Alloy Gr-1, Gr-9, Gr-12, Gr-16 Tubes in gr.1, 9 and 12 to AMS 4941. Get quotes from verified suppliers on MetalMitra.
- Titanium Alloy Gr-1
- Gr-9
- Gr-12
- Gr-16 Tubes
- Seamless
- ERW
- Welded
- EFW
- LSAW
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Material | Titanium |
|---|---|
| Outer Diameter | 6.0mm~210mm |
| Type | Gr.1 / 9 / 12 / 16 |
| Standard | AMS 4941, AMS 4942, AMS 4902, ASTM B337, ASME SB337, ASME SB338, ASTM B338, ASTM B861, ASTM B861/ASME SB861 |
| Processing | Seamless / Welding |
| Finish | Pickled, Passivation, Inside & Outside Mechanical Polishing, BA, Electro-polishing (EP) |
| Condition | Solution Annealing and water rapid quenched, Bright Annealing Application: Industrial, medical, aviation, military, salt-making, petrochemical, metallurgy, electronics, etc |
Titanium Alloy Gr-1, Gr-9, Gr-12, Gr-16 Tubes for process, pressure and heat-transfer lines, available on MetalMitra in gr.1, 9 and 12 to AMS 4941, with mill-certified traceability on every lot.
Choose seamless, ERW, welded or fabricated construction across a broad spread of diameters, wall thicknesses, schedules and lengths for process, pressure and structural lines.
Titanium pairs an exceptional strength-to-weight ratio with outstanding resistance to seawater, chlorides and many oxidising media.
Product range
- Seamless Pipes — The go-to choice for high-pressure and high-temperature lines.
- ERW Pipes — Economical welded pipe for utility and process piping.
- Welded / EFW Pipes — Fusion-welded construction for large-diameter runs.
- Tubes — Round, square and rectangular tubes, plus U-bends for heat exchangers.
Why engineers choose it
- Lightweight — Exceptional strength-to-weight for lightweight designs.
- Corrosion Resistance — Excellent resistance in seawater and chloride media.
- Biocompatible — Suitable for selected medical and food-grade applications.
- Durability — Long service life in aggressive environments.
Specification – Titanium Alloy Gr-1, Gr-9, Gr-12, Gr-16 Tubes
| — | N | C | H | Fe | Al | V | Pa | Mo | Ni | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| Gr 1 | 0.03 | 0.08 | 0.015 | 0.20 | / | / | / | / | / | bal |
| Gr 2 | 0.03 | 0.08 | 0.015 | 0.30 | / | / | / | / | / | bal |
| Gr 3 | 0.05 | 0.08 | 0.015 | 0.30 | / | / | / | / | / | bal |
| Gr 4 | 0.05 | 0.08 | 0.015 | 0.50 | / | / | / | / | / | bal |
| Gr 5 | 0.05 | 0.08 | 0.015 | 0.40 | 5.5~6.75 | 3.5~4.5 | / | / | / | bal |
| Gr 7 | 0.03 | 0.08 | 0.015 | 0.30 | / | / | 0.12~0.25 | / | / | bal |
| Gr 9 | 0.03 | 0.08 | 0.015 | 0.25 | 2.5~3.5 | 2.0~3.0 | / | / | / | bal |
| Gr12 | 0.03 | 0.08 | 0.015 | 0.30 | / | / | / | 0.2~0.4 | 0.6~0.9 | bal |
Cold-Drawn Tubes and Pipes Dimension – Titanium Alloy Gr-1, Gr-9, Gr-12, Gr-16 Tubes
| Outside Diameter: | 6~114 mm |
|---|---|
| Wall-thickness: | 0.5~5.5 mm |
| Length: | For O.D. 10~15 mm, Max. 4,000 mm |
| — | For O.D. above 15 mm, Max. 12,000 mm |
| Delivery condition: | Cold drawn and annealed in vacuum annealing furnace |
Extruded tubes and pipes Dimension – Titanium Alloy Gr-1, Gr-9, Gr-12, Gr-16 Tubes
| Outside Diameter: | 25~210 mm |
|---|---|
| Wall-thickness: | 4~30 mm |
| Length: | 1,000~10,000 mm |
Where it is used
- Aerospace
- Chemical Processing
- Marine Engineering
- Desalination
- Heat Exchangers
- Medical Equipment
- Power Generation
- Offshore Oil & Gas
- Pulp & Paper
- Electroplating
- Fabrication
- General Engineering
Inspection & paperwork
Suppliers on MetalMitra back Titanium Alloy Gr-1, Gr-9, Gr-12, Gr-16 Tubes with the checks and paperwork your QA team expects.
- Dimensional & visual inspection
- Grade verification against the order
- Chemical composition verification
- Mechanical property testing
- Flattening / flaring tests as applicable
- Hydrostatic testing as applicable
- Ultrasonic / eddy current testing as applicable
- EN 10204 3.1 Mill Test Certificate
- Third-party inspection (TPI) on request
The MetalMitra advantage
- Checked sellers only — Every supplier profile is screened by MetalMitra before it goes live.
- Faster sourcing — Post one requirement and receive competitive offers without chasing calls.
- Paperwork sorted — MTC 3.1, test reports and TPI arranged as your project demands.
- Global logistics — Seaworthy packing and dispatch to project sites across the world.
Get a quote
Tell us the specification, quantity and destination you need for Titanium Alloy Gr-1, Gr-9, Gr-12, Gr-16 Tubes. MetalMitra connects you with suppliers who can deliver.
Technical note: Figures shown are indicative. Final acceptance should be based on the applicable standard, approved drawings and the MTC supplied with the material.
Applications & industries
- Aerospace
- Chemical Processing
- Marine Engineering
- Desalination
- Heat Exchangers
- Medical Equipment
- Power Generation
- Offshore Oil & Gas
- Pulp & Paper
- Electroplating
- Fabrication
- General Engineering
- Oil & Gas
- Power Generation
- Chemical Processing
- Desalination
- Marine & Shipbuilding
- Pulp & Paper
- Aerospace
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
Need Titanium Alloy Gr-1, Gr-9, Gr-12, Gr-16 Tubes?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
