Nickel Alloy Steel Ferrule Fittings

Need a dependable nickel alloy instrumentation fitting? Nickel Alloy Steel Ferrule Fittings on MetalMitra come in screwed – bsp and BSPT, ready for leak-tight instrument and hydraulic lines.

Nickel Alloy Steel Ferrule Fittings are compression-type tube fittings that use front and back ferrules to grip the tube and create a reliable, leak-tight seal without welding.

Nickel alloys offer excellent resistance to corrosion in caustic, reducing and many neutral environments, along with good mechanical properties and thermal and electrical conductivity.

Available forms & variants

• Male & Female Connectors — Connect tubing to threaded ports and equipment.
• Unions & Reducers — Join tubes of the same or different sizes.
• Elbows, Tees & Crosses — Change direction or branch instrumentation lines.
• Caps, Plugs & Ferrules — End closures and replacement ferrule sets.

Performance highlights

• Caustic Resistance — Excellent resistance to caustic alkalis.
• Corrosion Resistance — Performs well in many reducing and neutral media.
• Good Conductivity — Useful thermal and electrical conductivity.
• Ductility — Good formability and fabrication characteristics.

Typical applications

• Chemical Processing
• Caustic Soda Production
• Food Processing
• Electronics
• Petrochemical
• Aerospace
• Synthetic Fibre Plants
• Heat Exchangers
• Power Generation
• Marine Engineering
• Fabrication
• General Engineering

Quality checks & certification

Every lot of Nickel Alloy Steel Ferrule Fittings sourced through MetalMitra can be inspected and documented to the governing standard and your purchase order.

• Dimensional & thread inspection
• Visual inspection
• Grade verification against the order
• Ferrule fit-up check
• Pressure / leak testing as applicable
• Positive Material Identification (PMI) as applicable
• EN 10204 3.1 Mill Test Certificate
• Project-specific documentation on request

Chemical & mechanical properties

Chemical composition and mechanical properties are supplied to the limits of the governing material standard. Actual heat values are reported on the mill test certificate shared with each consignment.

Why buy through MetalMitra

• Checked sellers only — Every supplier profile is screened by MetalMitra before it goes live.
• Faster sourcing — Post one requirement and receive competitive offers without chasing calls.
• Paperwork sorted — MTC 3.1, test reports and TPI arranged as your project demands.
• Global logistics — Seaworthy packing and dispatch to project sites across the world.

Ready to buy?

Send your size, grade, quantity and delivery location for Nickel Alloy Steel Ferrule Fittings, and matching suppliers on MetalMitra will come back with offers.

Technical note: Figures shown are indicative. Final acceptance should be based on the applicable standard, approved drawings and the MTC supplied with the material.