Cu-Ni 90/10 Pipes & Tubes

Need a dependable copper-nickel piping? Cu-Ni 90/10 Pipes & Tubes on MetalMitra come in seamless, ERW and welded to ASTM / ASME SB 111 / 151 / 466, ready for process, pressure and heat-transfer lines.

Choose seamless, ERW, welded or fabricated construction across a broad spread of diameters, wall thicknesses, schedules and lengths for process, pressure and structural lines.

Cu-Ni 90/10 (C70600) is a copper-nickel alloy widely used for seawater piping because of its corrosion and biofouling resistance. Copper nickel (Cu-Ni) alloys such as 90/10 and 70/30 offer excellent resistance to seawater corrosion and biofouling, combined with good thermal conductivity and fabricability.

Available forms & variants

• Seamless Pipes — The go-to choice for high-pressure and high-temperature lines.
• ERW Pipes — Economical welded pipe for utility and process piping.
• Welded / EFW Pipes — Fusion-welded construction for large-diameter runs.
• Tubes — Round, square and rectangular tubes, plus U-bends for heat exchangers.

Performance highlights

• Seawater Corrosion Resistance — Excellent performance in seawater and marine environments.
• Biofouling Resistance — Natural resistance to marine biofouling.
• Thermal Conductivity — Good heat-transfer properties for exchangers and condensers.
• Easy Fabrication — Good formability and weldability.

Typical applications

• Marine Engineering
• Shipbuilding
• Desalination
• Offshore Platforms
• Heat Exchangers
• Condensers
• Seawater Piping
• Power Generation
• Oil & Gas
• Fire Fighting Systems
• Fabrication
• General Engineering

Quality checks & certification

Every lot of Cu-Ni 90/10 Pipes & Tubes sourced through MetalMitra can be inspected and documented to the governing standard and your purchase order.

• Dimensional & visual inspection
• Grade verification against the order
• Chemical composition verification
• Mechanical property testing
• Flattening / flaring tests as applicable
• Hydrostatic testing as applicable
• Ultrasonic / eddy current testing as applicable
• EN 10204 3.1 Mill Test Certificate
• Third-party inspection (TPI) on request

Why buy through MetalMitra

• Checked sellers only — Every supplier profile is screened by MetalMitra before it goes live.
• Faster sourcing — Post one requirement and receive competitive offers without chasing calls.
• Paperwork sorted — MTC 3.1, test reports and TPI arranged as your project demands.
• Global logistics — Seaworthy packing and dispatch to project sites across the world.

Ready to buy?

Send your size, grade, quantity and delivery location for Cu-Ni 90/10 Pipes & Tubes, and matching suppliers on MetalMitra will come back with offers.

Technical note: Figures shown are indicative. Final acceptance should be based on the applicable standard, approved drawings and the MTC supplied with the material.