CS Forged Socket weld Pipe Fittings in standard and custom sizes to ASTM A105 / A694 / A350 LF3 / A350 LF2. Get quotes from verified suppliers on MetalMitra.
- CS Forged Socket weld Pipe Fittings
- Socket Weld
- Threaded
- Class 2000
- Class 3000
- Class 6000
- Class 9000
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Specifications | ASTM A105 / A694 / A350 LF3 / A350 LF2 |
|---|---|
| Low temperature Steel | A420 WPL3 / A420 WPL6 |
| Size | 1/8" TO 4" |
| Dimensions | ANSI/ASME B16.11 & BS3799, etc |
| Pressure Rating | 2000#, 3000#, 6000#, 9000# |
| Grades | F42 / F46 / F52 / F56 / F60 / F65 / F70 |
| Types | Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT, Threaded Fittings |
Grades & standards
- Carbon Steel A105
- ASTM A105
- ASME B16.11
Chemical composition & mechanical properties
| C | Mn | P | S | Si |
|---|---|---|---|---|
| 0.35 | 0.60–1.05 | 0.035 | 0.040 | 0.10–0.35 |
| Tensile strength, min | 485 MPa |
|---|---|
| Yield strength (0.2%), min | 250 MPa |
| Elongation in 50 mm, min | 22% |
| Hardness, max | 187 HBW |
Single values are maximums unless marked min. Values per ASTM A105 (forgings); always confirm against the purchase specification and the mill test certificate.
CS Forged Socket weld Pipe Fittings for changes in direction, branching and size transitions, available on MetalMitra in socket weld & screwed – npt, BSP and BSPT to ASTM A105 / A694 / A350 LF3 / A350 LF2, with mill-certified traceability on every lot.
CS Forged Socket weld Pipe Fittings are forged small-bore pipe fittings with socket weld or threaded ends, manufactured to ASME B16.11 for high-pressure piping and instrumentation lines.
Carbon steel is the workhorse of industrial piping: strong, tough, easy to weld and economical for pressure, structural and general engineering duty.
Product range
- Elbows & Tees — 45° and 90° elbows, equal and reducing tees.
- Couplings & Unions — Full couplings, half couplings and unions.
- Nipples & Swages — Pipe nipples, barrel nipples and swage nipples.
- Plugs, Bushings & Caps — Hex plugs, bushings and end caps.
Why engineers choose it
- High Strength — Dependable strength for pressure and structural work.
- Weldability — Welds and fabricates easily in the shop or on site.
- Cost Effective — Cost-effective across a wide range of uses.
- Wide Availability — Available across many sizes, schedules and specs.
Where it is used
- Oil & Gas
- Petrochemical
- Power Plants
- Water Pipelines
- Structural Engineering
- Construction
- Boilers
- Refineries
- Fertilizer Plants
- General Engineering
- Fabrication
Inspection & paperwork
Suppliers on MetalMitra back CS Forged Socket weld Pipe Fittings with the checks and paperwork your QA team expects.
- Dimensional inspection
- Thread and socket bore inspection
- Visual inspection
- Grade verification against the order
- Chemical composition verification
- Hardness testing as applicable
- Positive Material Identification (PMI)
- EN 10204 3.1 Mill Test Certificate
The MetalMitra advantage
- Verified suppliers — Mills, manufacturers and stockists are reviewed by the MetalMitra team before they list.
- One RFQ, several quotes — Share size, grade and quantity once and compare offers side by side.
- Full traceability — Heat numbers, EN 10204 3.1 MTCs and third-party inspection on request.
- Delivered worldwide — Export-worthy packing and shipping to India, the Middle East, Africa, Europe and the Americas.
Get a quote
Tell us the specification, quantity and destination you need for CS Forged Socket weld Pipe Fittings. MetalMitra connects you with suppliers who can deliver.
Technical note: Values on this page are for reference. Always confirm against the governing standard, your purchase specification and the mill test certificate.
Applications & industries
- Oil & Gas
- Petrochemical
- Power Plants
- Water Pipelines
- Structural Engineering
- Construction
- Boilers
- Refineries
- Fertilizer Plants
- General Engineering
- Fabrication
- Oil & Gas
- Petrochemical & Refining
- Power Generation
- Chemical Processing
- Water & Wastewater
- Construction & Infrastructure
- Fertiliser
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
Need CS Forged Socket weld Pipe Fittings?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
