Threaded Reducing Tee

Need a dependable fitting? Threaded Reducing Tee on MetalMitra comes in standard and custom sizes to ASME B16.11, ready for changes in direction, branching and size transitions.

Through MetalMitra you can source Threaded Reducing Tee in stainless steel, carbon steel, alloy steel, duplex, nickel alloy and other grades, across a broad range of sizes and pressure ratings.

A threaded reducing tee has a smaller threaded branch for taking a reduced line off the run.

Threaded (screwed) fittings are forged fittings with internal or external pipe threads, allowing small-bore piping to be assembled and dismantled without welding. They are used in utility, instrument, air, water and low-to-medium pressure process lines.

Available forms & variants

• Elbows & Tees — 45°, 90° and street elbows, tees and crosses.
• Couplings & Unions — Full, half and reducing couplings and unions.
• Plugs & Bushings — Hex, square and round head plugs, hex bushings.
• Nipples & Caps — Hex nipples, pipe nipples and caps.

Performance highlights

• Reduced Branch — Smaller threaded branch port.
• Compact — Avoids separate bushings.
• No Welding Needed — Fast to assemble, simple to maintain.
• Accurate Threads — Threads verified with ring and plug gauges.

Threaded Reducing Tee Material & Grades

Pressure Class vs Pipe Schedule

As per ASME B16.11, the pressure class of threaded fittings is matched to the wall thickness of the connecting pipe:

Typical applications

• Utility & Air Lines
• Water Treatment
• Oil & Gas
• Chemical Processing
• Power Generation
• Instrumentation
• Hydraulics
• Fertilizer Plants
• Pharmaceutical
• Food Processing
• Fabrication
• General Engineering

Quality checks & certification

Every lot of Threaded Reducing Tee sourced through MetalMitra can be inspected and documented to the governing standard and your purchase order.

• Dimensional inspection as per ASME B16.11
• Thread gauge inspection (NPT / BSP)
• Visual inspection
• Positive Material Identification (PMI)
• Hardness testing as applicable
• EN 10204 3.1 Mill Test Certificate
• Third-party inspection (TPI) on request

Why buy through MetalMitra

• Verified suppliers — Mills, manufacturers and stockists are reviewed by the MetalMitra team before they list.
• One RFQ, several quotes — Share size, grade and quantity once and compare offers side by side.
• Full traceability — Heat numbers, EN 10204 3.1 MTCs and third-party inspection on request.
• Delivered worldwide — Export-worthy packing and shipping to India, the Middle East, Africa, Europe and the Americas.

Ready to buy?

Send your size, grade, quantity and delivery location for Threaded Reducing Tee, and matching suppliers on MetalMitra will come back with offers.

Technical note: Values on this page are for reference. Always confirm against the governing standard, your purchase specification and the mill test certificate.