Threaded 90 Degree Elbow

Source Threaded 90 Degree Elbow from verified mills, manufacturers and stockists on MetalMitra. Options span standard and custom sizes, produced to ASME B16.11, and every order can ship with an EN 10204 3.1 certificate.

Through MetalMitra you can source Threaded 90 Degree Elbow in stainless steel, carbon steel, alloy steel, duplex, nickel alloy and other grades, across a broad range of sizes and pressure ratings.

A threaded 90° elbow makes a right-angle turn in small-bore piping with female threads on both ends.

Threaded (screwed) fittings are forged fittings with internal or external pipe threads, allowing small-bore piping to be assembled and dismantled without welding. They are used in utility, instrument, air, water and low-to-medium pressure process lines.

What you can source

• Elbows & Tees — 45°, 90° and street elbows, tees and crosses.
• Couplings & Unions — Full, half and reducing couplings and unions.
• Plugs & Bushings — Hex, square and round head plugs, hex bushings.
• Nipples & Caps — Hex nipples, pipe nipples and caps.

Key properties

• Right-Angle Turn — 90° change of direction.
• Weld-Free — Screwed assembly.
• No Welding Needed — Fast to assemble, simple to maintain.
• Accurate Threads — Threads verified with ring and plug gauges.

Threaded 90 Degree Elbow Material & Grades

Pressure Class vs Pipe Schedule

As per ASME B16.11, the pressure class of threaded fittings is matched to the wall thickness of the connecting pipe:

Applications & industries

• Utility & Air Lines
• Water Treatment
• Oil & Gas
• Chemical Processing
• Power Generation
• Instrumentation
• Hydraulics
• Fertilizer Plants
• Pharmaceutical
• Food Processing
• Fabrication
• General Engineering

Testing & documentation

Inspection and documentation for Threaded 90 Degree Elbow follow the applicable standard plus any extra requirements in your PO.

• Dimensional inspection as per ASME B16.11
• Thread gauge inspection (NPT / BSP)
• Visual inspection
• Positive Material Identification (PMI)
• Hardness testing as applicable
• EN 10204 3.1 Mill Test Certificate
• Third-party inspection (TPI) on request

Why source on MetalMitra

• Checked sellers only — Every supplier profile is screened by MetalMitra before it goes live.
• Faster sourcing — Post one requirement and receive competitive offers without chasing calls.
• Paperwork sorted — MTC 3.1, test reports and TPI arranged as your project demands.
• Global logistics — Seaworthy packing and dispatch to project sites across the world.

Request pricing

Post an RFQ for Threaded 90 Degree Elbow with your drawing or specification and receive quotes from verified suppliers.

Technical note: Figures shown are indicative. Final acceptance should be based on the applicable standard, approved drawings and the MTC supplied with the material.