Monel Socket weld Pipe Fittings

Need a dependable monel fitting? Monel Socket weld Pipe Fittings on MetalMitra come in socket weld & screwed – npt, BSP and BSPT to ASTM / ASME SB 564, ready for changes in direction, branching and size transitions.

Monel Socket weld Pipe Fittings are forged small-bore pipe fittings with socket weld or threaded ends, manufactured to ASME B16.11 for high-pressure piping and instrumentation lines.

Monel alloys are nickel-copper alloys known for high strength and excellent resistance to seawater, hydrofluoric acid, alkalis and many reducing environments.

Available forms & variants

• Elbows & Tees — 45° and 90° elbows, equal and reducing tees.
• Couplings & Unions — Full couplings, half couplings and unions.
• Nipples & Swages — Pipe nipples, barrel nipples and swage nipples.
• Plugs, Bushings & Caps — Hex plugs, bushings and end caps.

Performance highlights

• Seawater Resistance — Excellent performance in marine and seawater environments.
• Acid & Alkali Resistance — Good resistance to hydrofluoric acid and alkalis.
• High Strength — Good mechanical strength and toughness over a wide temperature range.
• Low-Temperature Toughness — Retains ductility at sub-zero temperatures.

Typical applications

• Marine Engineering
• Chemical Processing
• Hydrocarbon Processing
• Oil & Gas
• Pumps & Valves
• Heat Exchangers
• Desalination
• Petrochemical
• Hydrofluoric Acid Plants
• Boiler Feed Water
• Fabrication
• General Engineering

Quality checks & certification

Every lot of Monel Socket weld Pipe Fittings sourced through MetalMitra can be inspected and documented to the governing standard and your purchase order.

• Dimensional inspection
• Thread and socket bore inspection
• Visual inspection
• Grade verification against the order
• Chemical composition verification
• Hardness testing as applicable
• Positive Material Identification (PMI)
• EN 10204 3.1 Mill Test Certificate

Material properties

Chemical composition and mechanical properties are supplied to the limits of the governing material standard. Actual heat values are reported on the mill test certificate shared with each consignment.

Why buy through MetalMitra

• Verified suppliers — Mills, manufacturers and stockists are reviewed by the MetalMitra team before they list.
• One RFQ, several quotes — Share size, grade and quantity once and compare offers side by side.
• Full traceability — Heat numbers, EN 10204 3.1 MTCs and third-party inspection on request.
• Delivered worldwide — Export-worthy packing and shipping to India, the Middle East, Africa, Europe and the Americas.

Ready to buy?

Send your size, grade, quantity and delivery location for Monel Socket weld Pipe Fittings, and matching suppliers on MetalMitra will come back with offers.

Technical note: Values on this page are for reference. Always confirm against the governing standard, your purchase specification and the mill test certificate.