Monel K500 Round Bar in square, round and hex to ASTM B 164. Compare quotes from verified suppliers on MetalMitra, with MTC 3.1 and worldwide delivery.
- Monel K500 Round Bar
- Monel K500
- Round Bars
- Bright Bars
- Hex Bars
- Square Bars
- Flat Bars
- Forged Bars
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Dimensions | ASTM, ASME and API |
|---|---|
| Specifications | ASTM B 164, B 865, ASME SB 164, SB 865 |
| Grade | Monel K500 (UNS No. N05500) |
| Size | 6 mm to 120 mm |
| Form | Square, Round, Hex, Flat, Wire In Black & Bright Finish |
| Length | Random, Fix & Cut Length |
| Finish | Bright, Polish & Black |
Grades & standards
- Monel K500
Chemical composition & mechanical properties
| Ni (+Co) | Al | Ti | Fe | Mn | C | Cu |
|---|---|---|---|---|---|---|
| 63.0–70.0 | 2.30–3.15 | 0.35–0.85 | 2.0 | 1.5 | 0.25 | balance |
Single values are maximums unless marked min. Values per ASTM B865; always confirm against the purchase specification and the mill test certificate.
Source Monel K500 Round Bar from verified mills, manufacturers and stockists on MetalMitra. Options span square, round and hex, produced to ASTM B 164, and every order can ship with an EN 10204 3.1 certificate.
This range covers round, square, hex and flat sections in bright, black, peeled or forged condition, ready for machine shops and component makers.
Monel K500 is a precipitation-hardenable nickel-copper alloy that adds high strength and hardness to the corrosion resistance of Monel 400. Monel alloys are nickel-copper alloys known for high strength and excellent resistance to seawater, hydrofluoric acid, alkalis and many reducing environments.
What you can source
- Round Bars — Bright, black, peeled or centreless-ground rounds.
- Hex & Square Bars — Hex and square sections for turned and machined parts.
- Flat Bars — Flats for fabrication and general engineering.
- Forged & Hollow Bars — Forged bars, rings and hollow bars made to order.
Key properties
- Seawater Resistance — Excellent performance in marine and seawater environments.
- Acid & Alkali Resistance — Good resistance to hydrofluoric acid and alkalis.
- High Strength — Good mechanical strength and toughness over a wide temperature range.
- Low-Temperature Toughness — Retains ductility at sub-zero temperatures.
Applications & industries
- Marine Engineering
- Chemical Processing
- Hydrocarbon Processing
- Oil & Gas
- Pumps & Valves
- Heat Exchangers
- Desalination
- Petrochemical
- Hydrofluoric Acid Plants
- Boiler Feed Water
- Fabrication
- General Engineering
Testing & documentation
Inspection and documentation for Monel K500 Round Bar follow the applicable standard plus any extra requirements in your PO.
- Diameter & straightness inspection
- Visual and surface inspection
- Grade verification against the order
- Chemical composition verification
- Mechanical property testing
- Hardness testing as applicable
- Ultrasonic testing as applicable
- EN 10204 3.1 Mill Test Certificate
Why source on MetalMitra
- Verified suppliers — Mills, manufacturers and stockists are reviewed by the MetalMitra team before they list.
- One RFQ, several quotes — Share size, grade and quantity once and compare offers side by side.
- Full traceability — Heat numbers, EN 10204 3.1 MTCs and third-party inspection on request.
- Delivered worldwide — Export-worthy packing and shipping to India, the Middle East, Africa, Europe and the Americas.
Request pricing
Post an RFQ for Monel K500 Round Bar with your drawing or specification and receive quotes from verified suppliers.
Technical note: Values on this page are for reference. Always confirm against the governing standard, your purchase specification and the mill test certificate.
Applications & industries
- Marine Engineering
- Chemical Processing
- Hydrocarbon Processing
- Oil & Gas
- Pumps & Valves
- Heat Exchangers
- Desalination
- Petrochemical
- Hydrofluoric Acid Plants
- Boiler Feed Water
- Fabrication
- General Engineering
- Oil & Gas
- Petrochemical & Refining
- Power Generation
- Chemical Processing
- Desalination
- Marine & Shipbuilding
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
Need Monel K500 Round Bar?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
