Barred Tee in seamless, welded and fabricated to ASME B16.9. Compare quotes from verified suppliers on MetalMitra, with MTC 3.1 and worldwide delivery.
- Barred Tee
- ASME B16.9
- Seamless
- Welded
- SCH 5S – XXS
- 1/2" – 48" NB
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Bars | Welded guide bars as per project specification |
|---|---|
| Branch | Equal or reducing |
| Standards | ASME B16.9, ASME B16.25 (bevel ends), ASME B16.28, MSS SP-43, MSS SP-75 |
| Size | 1/2" NB to 48" NB (seamless up to 24" NB) |
| Wall Thickness | SCH 5S, 10S, 20, 30, 40S, STD, 60, 80S, XS, 100, 120, 140, 160, XXS |
| Type | Seamless / Welded / Fabricated |
| Ends | Bevelled ends as per ASME B16.25 |
Grades & standards
- ASME B16.9
- MSS SP-43
Barred Tee for changes in direction, branching and size transitions, available on MetalMitra in seamless, welded and fabricated to ASME B16.9, with mill-certified traceability on every lot.
Through MetalMitra you can source Barred Tee in stainless steel, carbon steel, alloy steel, duplex, nickel alloy and other grades, across a broad range of sizes and pressure ratings.
A barred tee has guide bars welded across the branch opening so that pipeline pigs pass the branch without entering or getting stuck.
Buttweld fittings are bevelled at the ends and welded directly to the pipe, giving a continuous, leak-resistant joint with a smooth bore and low pressure drop. They are the standard choice for process piping above 2" NB and for high-pressure, high-temperature service.
Product range
- Elbows — 45°, 90° and 180° long and short radius elbows.
- Tees & Crosses — Equal and reducing tees and crosses.
- Reducers — Concentric and eccentric reducers.
- Stub Ends & Caps — Lap joint stub ends and pipe end caps.
Why engineers choose it
- Pig Guide Bars — Bars stop pigs entering the branch.
- Pipeline Service — Used on piggable oil and gas pipelines.
- Smooth Flow — Butt-welded joints for a smooth bore and minimal pressure drop.
- High-Pressure Ready — Rated for high-pressure, high-temperature service.
Barred Tee Material & Grades
| Material | Grades / Specifications |
|---|---|
| Stainless Steel | ASTM A403 / ASME SA403 WP304, 304L, 304H, 309, 310S, 316, 316L, 316H, 316Ti, 317L, 321, 347, 904L |
| Duplex & Super Duplex | ASTM A815 UNS S31803, S32205, S32750, S32760 |
| Carbon Steel | ASTM A234 WPB, WPC; ASTM A420 WPL3, WPL6; MSS SP-75 WPHY 42, 46, 52, 56, 60, 65, 70 |
| Alloy Steel | ASTM A234 WP1, WP5, WP9, WP11, WP12, WP22, WP91 |
| Nickel Alloys | ASTM B366 – Nickel 200/201, Monel 400, Inconel 600/625, Incoloy 800/825, Hastelloy C276, Alloy 20 |
| Copper Nickel | ASTM B466 / B467 – Cu-Ni 90/10 (C70600), Cu-Ni 70/30 (C71500) |
Where it is used
- Oil & Gas
- Petrochemical
- Chemical Processing
- Refineries
- Power Generation
- Fertilizer Plants
- Pharmaceutical
- Marine & Offshore
- Water Treatment
- Sugar Industry
- Pulp & Paper
- Heat Exchangers
- Fabrication
- General Engineering
Inspection & paperwork
Suppliers on MetalMitra back Barred Tee with the checks and paperwork your QA team expects.
- Dimensional inspection as per ASME B16.9
- Wall thickness and bevel inspection
- Visual & surface inspection
- Positive Material Identification (PMI)
- Hydrostatic / NDT as applicable
- EN 10204 3.1 Mill Test Certificate
- Third-party inspection (TPI) on request
The MetalMitra advantage
- Verified suppliers — Mills, manufacturers and stockists are reviewed by the MetalMitra team before they list.
- One RFQ, several quotes — Share size, grade and quantity once and compare offers side by side.
- Full traceability — Heat numbers, EN 10204 3.1 MTCs and third-party inspection on request.
- Delivered worldwide — Export-worthy packing and shipping to India, the Middle East, Africa, Europe and the Americas.
Get a quote
Tell us the specification, quantity and destination you need for Barred Tee. MetalMitra connects you with suppliers who can deliver.
Technical note: Values on this page are for reference. Always confirm against the governing standard, your purchase specification and the mill test certificate.
Applications & industries
- Oil & Gas
- Petrochemical
- Chemical Processing
- Refineries
- Power Generation
- Fertilizer Plants
- Pharmaceutical
- Marine & Offshore
- Water Treatment
- Sugar Industry
- Pulp & Paper
- Heat Exchangers
- Fabrication
- General Engineering
- Oil & Gas
- Petrochemical & Refining
- Power Generation
- Chemical Processing
- Water & Wastewater
- Marine & Shipbuilding
- Pharmaceutical
- Fertiliser
- Pulp & Paper
- Sugar
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
Need Barred Tee?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
