Dairy Eccentric Reducer in standard and custom sizes. Compare quotes from verified suppliers on MetalMitra, with MTC 3.1 and worldwide delivery.
- Dairy Eccentric Reducer
- SS 304 / 316L
- Ra ≤ 0.8 µm
- 3-A / DIN / SMS / ISO
- Tri-Clamp
- Electropolished
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Type | Eccentric |
|---|---|
| Standards | 3-A, ASME BPE, DIN 11850 / 11851 / 11852 / 11853, SMS 3008 / 1145, ISO 2037 / 2852, IDF / ISO 2853, BS 4825 |
| Size | 1/2" to 6" OD (12.7 mm – 152.4 mm) / DN10 – DN150 |
| Material | SS 304, SS 304L, SS 316, SS 316L |
| Internal Finish | Ra ≤ 0.8 µm, Ra ≤ 0.5 µm, Electropolished on request |
| External Finish | Mirror / Satin polish |
| Ends | Weld End, Tri-Clamp (TC), SMS / DIN / RJT / IDF Union |
Need a dependable stainless steel fitting? Dairy Eccentric Reducer on MetalMitra comes in standard and custom sizes, ready for changes in direction, branching and size transitions.
A dairy eccentric reducer is a sanitary reducer with one flat side, giving full drainability in horizontal hygienic lines and pump suction.
Dairy (sanitary) fittings are stainless steel fittings with smooth, polished internal surfaces and crevice-free joints that can be cleaned in place (CIP). They are used in dairy, food, beverage, brewery, pharmaceutical and cosmetic plants where hygiene is critical.
Available forms & variants
- Bends & Elbows — 45°, 90° and 180° sanitary bends.
- Tees & Crosses — Equal, reducing and short-outlet tees and crosses.
- Reducers — Concentric and eccentric sanitary reducers.
- Clamps, Ferrules & Unions — Tri-Clamp ferrules, clamps, SMS / DIN / RJT / IDF unions.
Performance highlights
- Fully Drainable — Flat side allows complete drainage.
- Pump Suction — Avoids air pockets.
- Hygienic Finish — Polished bores that keep product from building up.
- CIP Friendly — Crevice-free geometry made for CIP systems.
Dairy Eccentric Reducer Material & Grades
| Material | Grades / Specifications |
|---|---|
| Stainless Steel 304 / 304L | AISI 304 / 304L (1.4301 / 1.4307) for general food and dairy service |
| Stainless Steel 316 / 316L | AISI 316 / 316L (1.4401 / 1.4404) for pharma, CIP chemicals and salt-bearing products |
| Gaskets (for clamp & union fittings) | EPDM, Silicone, Viton (FKM), PTFE – FDA compliant |
Typical applications
- Dairy Plants
- Food Processing
- Beverages & Juices
- Breweries & Distilleries
- Pharmaceutical
- Biotechnology
- Cosmetics
- Water Purification
- Confectionery
- Edible Oil Plants
- CIP Systems
- Process Skids
Quality checks & certification
Every lot of Dairy Eccentric Reducer sourced through MetalMitra can be inspected and documented to the governing standard and your purchase order.
- Dimensional inspection
- Internal surface roughness (Ra) measurement
- Visual inspection of polish and welds
- Material grade verification (PMI)
- Pressure / leak testing as applicable
- EN 10204 3.1 Mill Test Certificate
- Cleaned, sealed and bagged packing
Why buy through MetalMitra
- Checked sellers only — Every supplier profile is screened by MetalMitra before it goes live.
- Faster sourcing — Post one requirement and receive competitive offers without chasing calls.
- Paperwork sorted — MTC 3.1, test reports and TPI arranged as your project demands.
- Global logistics — Seaworthy packing and dispatch to project sites across the world.
Ready to buy?
Send your size, grade, quantity and delivery location for Dairy Eccentric Reducer, and matching suppliers on MetalMitra will come back with offers.
Technical note: Figures shown are indicative. Final acceptance should be based on the applicable standard, approved drawings and the MTC supplied with the material.
Applications & industries
- Dairy Plants
- Food Processing
- Beverages & Juices
- Breweries & Distilleries
- Pharmaceutical
- Biotechnology
- Cosmetics
- Water Purification
- Confectionery
- Edible Oil Plants
- CIP Systems
- Process Skids
- Water & Wastewater
- Pharmaceutical
- Food & Dairy
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
Need Dairy Eccentric Reducer?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
