Dairy Tee in standard and custom sizes. Compare quotes from verified suppliers on MetalMitra, with MTC 3.1 and worldwide delivery.
- Dairy Tee
- SS 304 / 316L
- Ra ≤ 0.8 µm
- 3-A / DIN / SMS / ISO
- Tri-Clamp
- Electropolished
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Branch | Equal / Reducing / Short Outlet |
|---|---|
| Standards | 3-A, ASME BPE, DIN 11850 / 11851 / 11852 / 11853, SMS 3008 / 1145, ISO 2037 / 2852, IDF / ISO 2853, BS 4825 |
| Size | 1/2" to 6" OD (12.7 mm – 152.4 mm) / DN10 – DN150 |
| Material | SS 304, SS 304L, SS 316, SS 316L |
| Internal Finish | Ra ≤ 0.8 µm, Ra ≤ 0.5 µm, Electropolished on request |
| External Finish | Mirror / Satin polish |
| Ends | Weld End, Tri-Clamp (TC), SMS / DIN / RJT / IDF Union |
Source Dairy Tee from verified mills, manufacturers and stockists on MetalMitra. Options span standard and custom sizes, and every order can ship with an EN 10204 3.1 certificate.
A dairy tee is a sanitary equal or reducing tee with a polished bore for branching hygienic product and CIP lines.
Dairy (sanitary) fittings are stainless steel fittings with smooth, polished internal surfaces and crevice-free joints that can be cleaned in place (CIP). They are used in dairy, food, beverage, brewery, pharmaceutical and cosmetic plants where hygiene is critical.
What you can source
- Bends & Elbows — 45°, 90° and 180° sanitary bends.
- Tees & Crosses — Equal, reducing and short-outlet tees and crosses.
- Reducers — Concentric and eccentric sanitary reducers.
- Clamps, Ferrules & Unions — Tri-Clamp ferrules, clamps, SMS / DIN / RJT / IDF unions.
Key properties
- Equal & Reducing — Equal, reducing and short-outlet tees.
- Drawn Branch — Smooth drawn branches without crevices.
- Hygienic Finish — Polished bores that keep product from building up.
- CIP Friendly — Crevice-free geometry made for CIP systems.
Dairy Tee Material & Grades
| Material | Grades / Specifications |
|---|---|
| Stainless Steel 304 / 304L | AISI 304 / 304L (1.4301 / 1.4307) for general food and dairy service |
| Stainless Steel 316 / 316L | AISI 316 / 316L (1.4401 / 1.4404) for pharma, CIP chemicals and salt-bearing products |
| Gaskets (for clamp & union fittings) | EPDM, Silicone, Viton (FKM), PTFE – FDA compliant |
Applications & industries
- Dairy Plants
- Food Processing
- Beverages & Juices
- Breweries & Distilleries
- Pharmaceutical
- Biotechnology
- Cosmetics
- Water Purification
- Confectionery
- Edible Oil Plants
- CIP Systems
- Process Skids
Testing & documentation
Inspection and documentation for Dairy Tee follow the applicable standard plus any extra requirements in your PO.
- Dimensional inspection
- Internal surface roughness (Ra) measurement
- Visual inspection of polish and welds
- Material grade verification (PMI)
- Pressure / leak testing as applicable
- EN 10204 3.1 Mill Test Certificate
- Cleaned, sealed and bagged packing
Why source on MetalMitra
- Checked sellers only — Every supplier profile is screened by MetalMitra before it goes live.
- Faster sourcing — Post one requirement and receive competitive offers without chasing calls.
- Paperwork sorted — MTC 3.1, test reports and TPI arranged as your project demands.
- Global logistics — Seaworthy packing and dispatch to project sites across the world.
Request pricing
Post an RFQ for Dairy Tee with your drawing or specification and receive quotes from verified suppliers.
Technical note: Figures shown are indicative. Final acceptance should be based on the applicable standard, approved drawings and the MTC supplied with the material.
Applications & industries
- Dairy Plants
- Food Processing
- Beverages & Juices
- Breweries & Distilleries
- Pharmaceutical
- Biotechnology
- Cosmetics
- Water Purification
- Confectionery
- Edible Oil Plants
- CIP Systems
- Process Skids
- Water & Wastewater
- Pharmaceutical
- Food & Dairy
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
Need Dairy Tee?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
