Tri-Clamp (TC) Ferrule in short, long and heavy ferrule to ISO 2852. Compare quotes from verified suppliers on MetalMitra, with MTC 3.1 and worldwide delivery.
- Tri-Clamp (TC) Ferrule
- SS 304 / 316L
- Ra ≤ 0.8 µm
- 3-A / DIN / SMS / ISO
- Tri-Clamp
- Electropolished
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Type | Short / Long / Heavy Ferrule |
|---|---|
| Standard | ISO 2852, DIN 32676, ASME BPE |
| Standards | 3-A, ASME BPE, DIN 11850 / 11851 / 11852 / 11853, SMS 3008 / 1145, ISO 2037 / 2852, IDF / ISO 2853, BS 4825 |
| Size | 1/2" to 6" OD (12.7 mm – 152.4 mm) / DN10 – DN150 |
| Material | SS 304, SS 304L, SS 316, SS 316L |
| Internal Finish | Ra ≤ 0.8 µm, Ra ≤ 0.5 µm, Electropolished on request |
| External Finish | Mirror / Satin polish |
| Ends | Weld End, Tri-Clamp (TC), SMS / DIN / RJT / IDF Union |
Need a dependable stainless steel fitting? Tri-Clamp (TC) Ferrule on MetalMitra comes in short, long and heavy ferrule to ISO 2852, ready for changes in direction, branching and size transitions.
A Tri-Clamp ferrule is a sanitary end welded to tube, which mates with another ferrule using a gasket and clamp for quick, hygienic connections.
Dairy (sanitary) fittings are stainless steel fittings with smooth, polished internal surfaces and crevice-free joints that can be cleaned in place (CIP). They are used in dairy, food, beverage, brewery, pharmaceutical and cosmetic plants where hygiene is critical.
Available forms & variants
- Bends & Elbows — 45°, 90° and 180° sanitary bends.
- Tees & Crosses — Equal, reducing and short-outlet tees and crosses.
- Reducers — Concentric and eccentric sanitary reducers.
- Clamps, Ferrules & Unions — Tri-Clamp ferrules, clamps, SMS / DIN / RJT / IDF unions.
Performance highlights
- Quick Connect — Clamp connection without tools.
- Easy Cleaning — Simple dismantling for inspection and cleaning.
- Hygienic Finish — Polished bores that keep product from building up.
- CIP Friendly — Crevice-free geometry made for CIP systems.
Tri-Clamp (TC) Ferrule Material & Grades
| Material | Grades / Specifications |
|---|---|
| Stainless Steel 304 / 304L | AISI 304 / 304L (1.4301 / 1.4307) for general food and dairy service |
| Stainless Steel 316 / 316L | AISI 316 / 316L (1.4401 / 1.4404) for pharma, CIP chemicals and salt-bearing products |
| Gaskets (for clamp & union fittings) | EPDM, Silicone, Viton (FKM), PTFE – FDA compliant |
Typical applications
- Dairy Plants
- Food Processing
- Beverages & Juices
- Breweries & Distilleries
- Pharmaceutical
- Biotechnology
- Cosmetics
- Water Purification
- Confectionery
- Edible Oil Plants
- CIP Systems
- Process Skids
Quality checks & certification
Every lot of Tri-Clamp (TC) Ferrule sourced through MetalMitra can be inspected and documented to the governing standard and your purchase order.
- Dimensional inspection
- Internal surface roughness (Ra) measurement
- Visual inspection of polish and welds
- Material grade verification (PMI)
- Pressure / leak testing as applicable
- EN 10204 3.1 Mill Test Certificate
- Cleaned, sealed and bagged packing
Why buy through MetalMitra
- Verified suppliers — Mills, manufacturers and stockists are reviewed by the MetalMitra team before they list.
- One RFQ, several quotes — Share size, grade and quantity once and compare offers side by side.
- Full traceability — Heat numbers, EN 10204 3.1 MTCs and third-party inspection on request.
- Delivered worldwide — Export-worthy packing and shipping to India, the Middle East, Africa, Europe and the Americas.
Ready to buy?
Send your size, grade, quantity and delivery location for Tri-Clamp (TC) Ferrule, and matching suppliers on MetalMitra will come back with offers.
Technical note: Values on this page are for reference. Always confirm against the governing standard, your purchase specification and the mill test certificate.
Applications & industries
- Dairy Plants
- Food Processing
- Beverages & Juices
- Breweries & Distilleries
- Pharmaceutical
- Biotechnology
- Cosmetics
- Water Purification
- Confectionery
- Edible Oil Plants
- CIP Systems
- Process Skids
- Water & Wastewater
- Pharmaceutical
- Food & Dairy
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
Need Tri-Clamp (TC) Ferrule?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
