Lateral Tee (Y-Tee) in seamless, welded and fabricated to MSS SP-75 / manufacturer standard. Get quotes from verified suppliers on MetalMitra.
- Lateral Tee (Y-Tee)
- ASME B16.9
- Seamless
- Welded
- SCH 5S – XXS
- 1/2" – 48" NB
Your details are never shown publicly. The MetalMitra team reviews every requirement.
Specifications
| Branch Angle | 45° or as required |
|---|---|
| Standard | MSS SP-75 / manufacturer standard |
| Standards | ASME B16.9, ASME B16.25 (bevel ends), ASME B16.28, MSS SP-43, MSS SP-75 |
| Size | 1/2" NB to 48" NB (seamless up to 24" NB) |
| Wall Thickness | SCH 5S, 10S, 20, 30, 40S, STD, 60, 80S, XS, 100, 120, 140, 160, XXS |
| Type | Seamless / Welded / Fabricated |
| Ends | Bevelled ends as per ASME B16.25 |
Grades & standards
- ASME B16.9
- MSS SP-43
Source Lateral Tee (Y-Tee) from verified mills, manufacturers and stockists on MetalMitra. Options span seamless, welded and fabricated, produced to MSS SP-75 / manufacturer standard, and every order can ship with an EN 10204 3.1 certificate.
Through MetalMitra you can source Lateral Tee (Y-Tee) in stainless steel, carbon steel, alloy steel, duplex, nickel alloy and other grades, across a broad range of sizes and pressure ratings.
A lateral tee has a branch at 45° (or another angle) to the run, giving a smoother flow path than a 90° tee for slurry, drainage and solids handling.
Buttweld fittings are bevelled at the ends and welded directly to the pipe, giving a continuous, leak-resistant joint with a smooth bore and low pressure drop. They are the standard choice for process piping above 2" NB and for high-pressure, high-temperature service.
What you can source
- Elbows — 45°, 90° and 180° long and short radius elbows.
- Tees & Crosses — Equal and reducing tees and crosses.
- Reducers — Concentric and eccentric reducers.
- Stub Ends & Caps — Lap joint stub ends and pipe end caps.
Key properties
- 45° Branch — Lower turbulence than a 90° tee.
- Solids Handling — Suitable for slurry and drainage lines.
- Smooth Flow — Butt-welded joints for a smooth bore and minimal pressure drop.
- High-Pressure Ready — Rated for high-pressure, high-temperature service.
Lateral Tee (Y-Tee) Material & Grades
| Material | Grades / Specifications |
|---|---|
| Stainless Steel | ASTM A403 / ASME SA403 WP304, 304L, 304H, 309, 310S, 316, 316L, 316H, 316Ti, 317L, 321, 347, 904L |
| Duplex & Super Duplex | ASTM A815 UNS S31803, S32205, S32750, S32760 |
| Carbon Steel | ASTM A234 WPB, WPC; ASTM A420 WPL3, WPL6; MSS SP-75 WPHY 42, 46, 52, 56, 60, 65, 70 |
| Alloy Steel | ASTM A234 WP1, WP5, WP9, WP11, WP12, WP22, WP91 |
| Nickel Alloys | ASTM B366 – Nickel 200/201, Monel 400, Inconel 600/625, Incoloy 800/825, Hastelloy C276, Alloy 20 |
| Copper Nickel | ASTM B466 / B467 – Cu-Ni 90/10 (C70600), Cu-Ni 70/30 (C71500) |
Applications & industries
- Oil & Gas
- Petrochemical
- Chemical Processing
- Refineries
- Power Generation
- Fertilizer Plants
- Pharmaceutical
- Marine & Offshore
- Water Treatment
- Sugar Industry
- Pulp & Paper
- Heat Exchangers
- Fabrication
- General Engineering
Testing & documentation
Inspection and documentation for Lateral Tee (Y-Tee) follow the applicable standard plus any extra requirements in your PO.
- Dimensional inspection as per ASME B16.9
- Wall thickness and bevel inspection
- Visual & surface inspection
- Positive Material Identification (PMI)
- Hydrostatic / NDT as applicable
- EN 10204 3.1 Mill Test Certificate
- Third-party inspection (TPI) on request
Why source on MetalMitra
- Verified suppliers — Mills, manufacturers and stockists are reviewed by the MetalMitra team before they list.
- One RFQ, several quotes — Share size, grade and quantity once and compare offers side by side.
- Full traceability — Heat numbers, EN 10204 3.1 MTCs and third-party inspection on request.
- Delivered worldwide — Export-worthy packing and shipping to India, the Middle East, Africa, Europe and the Americas.
Request pricing
Post an RFQ for Lateral Tee (Y-Tee) with your drawing or specification and receive quotes from verified suppliers.
Technical note: Values on this page are for reference. Always confirm against the governing standard, your purchase specification and the mill test certificate.
Applications & industries
- Oil & Gas
- Petrochemical
- Chemical Processing
- Refineries
- Power Generation
- Fertilizer Plants
- Pharmaceutical
- Marine & Offshore
- Water Treatment
- Sugar Industry
- Pulp & Paper
- Heat Exchangers
- Fabrication
- General Engineering
- Oil & Gas
- Petrochemical & Refining
- Power Generation
- Chemical Processing
- Water & Wastewater
- Marine & Shipbuilding
- Pharmaceutical
- Fertiliser
- Pulp & Paper
- Sugar
Testing & documents
Ask for the documents you need in your requirement — suppliers confirm them in their quotation:
- Mill test certificate to EN 10204 3.1, or 3.2 with third-party witness
- Third-party inspection (TPI) by SGS, Bureau Veritas, TÜV or your nominated agency
- Tests as the standard or your order requires: hydro, PMI, IGC, NDT, hardness or impact tests
Need Lateral Tee (Y-Tee)?
Share grade, size, quantity and delivery location. We compare suitable suppliers and come back with a clear quotation.
